Filter
Top Products
COLOR CCD CAMERACOLOR CCD CAMERA User’s ManualUser’s Manual
1918
■
Connecting to a monitor
Please connect the video output terminal located on the back of the camera to
the monitor.
• The connection method varies depending on the type of monitor and
accessories. Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set and
select 75Ω for the Intermediate device as shown in the picture below.
CCD Camera
CCD Camera
Intermediate End monitor
Monitor
Installation
■
Connecting to power
Each model has a different power input specification.
Please check the model type and standard power requirement before
connecting to power.
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the camera
may affect the performance of the camera.
Standard voltage for camera operation : DC 12V±10%
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
AC Power Type (AC 24V, 500mA)
The recommended adaptor specification for SDC-415NA/ SDC-415PA is AC 24V,
500mA and the recommended adaptor specification for SDC-415ND/ SDC-
415PD is DC 12V, 500mA.
An adaptor that meets the standard requirement must be used.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG) #24(0.22mm
2
) #22(0.33mm
2
) #20(0.52mm
2
) #18(0.83mm
2
)
Resistance value(Ω/m) 0.078 0.050 0.030 0.018
Voltage drop(V/m) 0.028 0.018 0.011 0.006
DC Power Type (DC 12V, 500mA)