Samsung SDC-435 Camcorder User Manual


  Open as PDF
of 17
 
COLOR CCD CAMERA User Guide
22
COLOR CCD CAMERA User Guide
23
Operating Your Camera
•BecausetherecanbeadifferenceintheeffectivenessofHLCaccordingtotheamountof
lightareainthescreen,optimizetheinstallationangleforthebestHLCperformance.
•
Whendark,theHLCisonlyactivatedwhenabrightlightexceedingaspecificsize.inNIGHTONLYmode.
•
TheHLCisnotactivatedindaylightorwhenbrightlightisnotpresentatnight.inNIGHTONLYmode.
Notes
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ‘SSNR’ by using the Up and Down
buttons so that the arrow indicates ‘SSNR’ .
2. Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON:ActivatesSSNRsothatnoiseisreduced.
SSNR3
MAIN MENU
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT COLOR
3.
Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the noise reduction level.
•
YoucannotsettheSSNRto‘ON’or‘OFF’whentheAGCmodeoftheEXPOSUREmenuis‘OFF’.
•WhenadjustingthenoisereductionlevelintheSSNRmode,rememberthatthehigher
the level set, the more the noise level will be reduced, as will the brightness of the image.
Notes
You can display pictures in color or black and white.
1.WhentheSETUPmenuscreenisdisplayed,select‘DAY/NIGHT’byusingtheUpand
Downbuttonssothatthearrowindicates‘DAY/NIGHT’.
DAY/NIGHT
MAIN MENU
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.SSDR
OFF
5.BACKLIGHT OFF
6.SSNR3 ON
7.DAY/NIGHT COLOR
8.SPECIAL
2.
Select a desired mode using the Left and Right buttons according to the picture display you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
AUTO :Themodeisswitchedto’Color‘inanormal
environment, but switches to ’B/W‘ mode
when ambient illumination is low. To set up
theswitchingtimeforAUTOmode,pressthe
SET button.
You can turn on or off the burst signal on
B/W mode.
- DWELL TIME : You can select the duration time about
changing the day/night mode.
5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
•WhenusingaVideoAutoIrisLens,ifyousetthelensleveltolow,automaticswitching
betweenColorandBlack&Whitemaynotoccur.
•WhenAGCintheEXPOSUREmenuis'OFF','---'modeoperatesaslikeselecting'COLOR'
modeand'AUTO'modecannotbeselected.
Notes
 previous next