Filter
Top Products
Operating Your Camera
COLOR CCD CAMERA User’s Manual
33
COLOR CCD CAMERA User’s Manual
32
You can control brightness of the screen by the shutter speed.
1. Press the SET button to display the setup menu and move the arrow
indicator to ‘Shutter’ using the UP or DOWN button.
2. Set ‘Shutter’ to the desired mode using the LEFT or RIGHT button.
A.FLK(1/100 for NTSC Model,1/120 for PAL Model)
:
Flickerless mode
ESC:When setting the optimal shutter speed automatically
Manual:When setting shutter speed manually
3. If you choose ‘Manual’, select the optimal shutter speed.
Shutter Speed Control
Manual:When using manual lens
3. When completed move the arrow indicator to ‘END’ and press the SET button.
• When the auto iris lens is mounted, you have to set the DC/Video selection
switch on the side of the camera properly according to the type of the lens. The
setup window displays DC or Video according to status of this selection switch.
(refer to page 12 picture)
• If you select 'DC'/'Video' mode, you can adjust the desired Brightness.
Notes
SETUP
CAMERA ID OFF
BACKLIGHT WDR
WHITE BAL. ATW
MOTION DET. OFF
LENS DC
SHUTTER ESC
AGC MIDDLE
• For effective A.FLK mode set WDR mode in Backlight menu to OFF. A.FLK mode is
not effective with WDR mode.
• If the camera directly faces strong fluorescent light with 'ESC' mode, the image
may become unstable.
• If you choose ‘ESC’, you can adjust the brightness of monitor screen using the
LEFT or RIGHT button.
• If you choose Manual mode, you can’t use WDR mode in ‘Backlight’ menu.
• If you select manual or A.FLK mode, Sens-up is not operated.
Notes
• You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’
to ‘1/120,000’sec (PAL Models).
* It is possible to adjust Sens-Up(x2 ~ x128) mode manually.
•
When the shutter speed is increased or decreased using the LEFT or RIGHT
button, you can find the difference by monitoring the brightness of the screen.
4. When completed, press the SET button.