Filter
Top Products
68
Of all the files stored in the memory card, the unprotected files
in the DCIM subfolder will be deleted. Remember that this
will permanently delete unprotected images. Important shots
should be stored on a computer before deletion takes place.
The startup image is stored in the camera's internal memory
(i.e., not on the memory card) and it will not be deleted even if
you delete all files on the memory card.
Protecting images
This is used to protect specific shots from being accidentally erased (Lock).
It also unprotects images that have been previously protected (Unlock).
1. Press the Up / Down button and select
the [Protect] menu tab. And then press
the Right button.
2. Select a desired sub menu by pressing the
UP / DOWN button and press the OK button.
[Select ] : Selection window for an
image to be protected /
released is displayed.
- Up / Down / Left / Right : Select an image
- OK button : Protect / release the
image
- Fn button : Your changes will be
saved and the menu will
disappear.
File Options
( )
You can add your voice to a stored still image.
Voice memo
- Press the shutter button to take a picture. The images are saved
on the memory. After saving the image, the voice will record for
10 seconds.
- To stop the recording, press the shutter button.
[Ready for recording] [Voice is recording][Voice memo menu]
Start Stop
Back Set
Protect
Voice memo :Off
DPOF
Copy To Card
Delete
Off
On
Select Set
Back Set
Protect
Voice memo :Off
DPOF
Copy To Card
Delete
Select
All
Protect All?
Lock
Unlock
Set
[All] : Protect / release all saved images
- If you protect an image, the protect
icon will be displayed on the LCD
monitor. (An unprotected image has
no indicator)
- An image in LOCK mode will be
protected from the delete function
or [Delete] functions, but will NOT be
protected from the [Format] function.