Filter
Top Products
Charging the battery
You can charge the battery using the AC power adaptor or USB cable.
1. Insert the battery to the camcorder.
²
page 16
2. Press the Power (
) button to turn off the camcorder.
3.
Open the connector cover of the unit.
4. Charge the battery using the AC power adaptor or USB cable.
The CHG (charge) lamp lights up and charging starts. When the
battery is fully charged, the charging (CHG) lamp turns green.
²
page 18
Using the AC power
adaptor
Connect the AC power adaptor with the
camcorder properly and plug the AC
Power adaptor to the wall outlet.
Using the USB cable
Connect the USB cable with the
camcorder properly and connect the other
end to a USB port of a PC.
•
Charging the battery pack in a low temperature may take longer or fail to fully charge (green indicator will not
turn on).
Please make sure that there are no foreign substances in plug and socket when you connect the AC power
supply to the camcorder.
Fully charge the battery pack before use.
When using the AC power supply, place it close to the wall outlet. If there is a malfunction during use of the
camcorder, separate the AC power supply immediately from the wall outlet.
Do not use the AC power supply in a tight space, such as between furnishings.
•
•
•
•
•
For recording indoors with available wall outlet, it is convenient to use the AC power supply instead of the battery pack.
It is recommended to charge the battery pack in a place with ambient temperature of 10°C ~ 30°C.
For charging, connecting both USB cable and AC power adaptor simultaneously will have the same effect
as using the AC power adaptor only.
Even with the power is switched on, battery pack will still charge with the AC power adaptor or USB cable.
But you need more charging time when the power is on. It is recommended you to keep the camcorder
turned off while charging.
•
•
•
•
CAUTION
Connecting the AC power adaptor
~GGGG{
Connecting the USB cable
~GGGG{
English_17