Filter
Top Products
INSERTING / EJECTING THE MEMORY CARD
Inserting a memory card
Ejecting a memory card
1. Turn the camcorder off.
2. Slide and open the battery/memory card
cover as shown in the fi
gure.
3. Insert the memory card into the memory
card slot in the direction of the arrow in
the fi
gure until it softly clicks.
4. Close the cover.
1. Turn the camcorder off.
2. Slide and open the battery/memory card
cover as shown in the fi
gure.
3. Slightly push the memory card inwards to
pop it out.
4. Pull the memory card out of the memory
card slot and close the cover.
As shown in the fi gure, be sure to insert the memory card with the label facing right.
Do not format the memory card on a PC.
Do not eject a memory card during operations such as recording, playback, formatting, deleting,
and editing. Doing so may damage the memory card or cause loss of data.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
If this is a new memory card, a card formatted by another device, or a card containing data stored
by another device, format the card.
²
page 73
Formatting erases all data on the memory card.
•
•
•
•
•
•
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
Card compatibility with the camcorder may vary depending on the manufacturer and type of memory
card.
31