Filter
Top Products
English_46
recording
Basic procedures to record a movie or photo image are described below and on the following pages.
RECORDING MOVIE IMAGES
You can record movie images in Movie Record mode only.
➥
page
22
Memory camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and
the other one is on the LCD panel. Select the Recording start/ stop button according to the use.
1. Turn the memory camcorder on.
Connect a power source to the memory camcorder.
➥
pages
14, 21
(A battery pack or an AC power adaptor)
Slide the POWER switch downward to turn on the power.
➥
page
22
Set the appropriate storage media.
➥
page
39
(Built-in memory (8GB (SMX-F33(2)BP/LP/RP/SP only)/16GB (SMX-F34(0)BP/LP/
RP/SP only)) or memory card)
Set the Lens open/close switch to open ( ).
➥
page 10
Movie Record is the default mode when you turn on the memory camcorder.
2. Check the subject on the LCD screen.
3. Press the Recording start/stop button.
The recording indicator ( ) will display and recording will start.
Pressing the Recording start/stop button again during recording will
set the memory camcorder to recording pause mode.
4. When recording is fi nished, turn the memory camcorder off.
•
•
•
•
•
•
•
•
•
For on-screen information display.
➥
page 23
Eject the battery pack when you have fi nished recording to prevent unnecessary battery power consumption.
For approximate recording time.
➥
page 44
For various functions available when you record movie images.
➥
pages 57~72
If focusing is diffi cult, use the manual focus function.
➥
page 63
During recording, some button operations are unavailable. (MODE button, MENU button, etc.)
Sound is recorded from the internal stereo microphone on the front of the memory camcorder.
Take care that this microphone is not blocked.
Before recording an important movie, make sure to test on the recording function to check if there is any
problem with the audio and video recording.
While recording, don't insert or eject the memory card as it may record noise.
Do not operate the power switch or remove the memory card while accessing the storage media.
Doing so may damage the storage media or the data on storage media.
•
•
•
•
•
•
•
•
•
•