Filter
Top Products
111
Adjusting the image during recording
Symptom Explanation/Solution
Focus does not
adjust automatically.
Set “Focus” to “Auto.”
page 57
The recording conditions are not suitable for auto focus.
Adjust the focus manually.
page 58
The lens is dusty on the surface. Clear the lens and check the focus.
Recording is being made in a dark place. Increase the brightness in the
place.
•
•
•
•
The image appears
too bright or flickering,
or changes in color.
This occurs when recording images under a fluorescent lamp, sodium
lamp, or mercury lamp. Cancel “iSCENE” to minimise these phenomena.
page 46
•
Playback on other devices (TV, etc.)
Symptom Explanation/Solution
You cannot view
the image or hear
the sound on the
connected device.
Connect the audio line of the Audio/Video cable jack to your camcorder
and the connected device (TV, DVD recorder, etc). (Red color- right, White
color- left)
The Audio/Video cable jack is not connected properly. Make sure that the
Audio/Video cable jack is connected to the proper jack.
page 93
•
•
Playback on your camcorder
Symptom Explanation/Solution
Pressing the
playback (Play/
Pause) button did
not start playing.
Press the MODE button to set Video Play mode.
Image files recorded on another camcorder may not play on your
camcorder.
Check out a memory card compatibility.
page 32
•
•
•
The Skip or Search
function does not
work properly.
If the temperature inside the camcorder is too high, it cannot function
properly.
Turn the camcorder off, wait for a few moments, and turn it on again.
•
Playback is
interrupted
unexpectedly.
Check if the AC adaptor or battery pack is properly connected and stable.
•
You cannot hear
sound when playing
a Time Lapse
recording.
The Time Lapse REC function does not support sound.
page 64
•
Photos stored on a
storage media are
not displayed in the
actual size.
Photos recorded on other devices may not appear at actual size.
This is not an error.
•