Filter
Top Products
English_97
W
T
ON
OFF
MODE
ON
OFF
W
T
ON
OFF
MODE
VIDEO
AUDIO
L
R
W
T
ON
OFF
MODE
VIDEO
AUDIO
L
R
Normal TV
Camcorder
Signal fl ow
Connecting to a normal (standard defi nition) TV (16:9/4:3)
If only a mono audio input is available on the TV set, use the white
plug (audio L) on the audio cable.
Do not use excessive force when connecting the cables.
It is recommended to use the AC power adaptor as the power
source.
Before connecting, make sure that the volume on the TV is turned
down: forgetting this may cause feedback from the TV speakers.
Carefully connect the input and output cables to the corresponding
connections on the device the camcorder is being used with.
•
•
•
•
•
VIDEOAUDIO
LR
VIDEOAUDIO
Red
Yellow
White
White
Yellow
Stereo Type
Monaural Type
Audio/Video cable
Use the provided Audio/Video cable to connect the camcorder to a TV as follows:
1. Connect the provided Audio/Video cable to the Audio/Video cable to the TV.
2. Turn on your TV and set the TV’s input selector to the Input your camcorder is connected to.
Refer to the TV’s instruction manual to see how to select the TV input.
•