Samsung SNB-5000 Security Camera User Manual


 
overview
14_ overview
Reset Button
Resets the camera settings to the default. Press and hold it for about 5
seconds to turn off the system indicator and restart the system.
J
Resetting the camera requires reconfiguration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
Power Port Used to plug the power cable.
GND Used for earth-grounding.
Network Port
Used to connect a PoE or LAN cable.
I/O Port
ALARM IN Used to connect the alarm input signal.
ALARM OUT Used to connect the alarm output signal.
ALARM COM Common port where the alarm output signal is connected.
GND Used for earth-grounding.
Video Out Port
Video signal output port connected to the monitor.