Filter
Top Products
9
English
In the <PORT> pane, provide necessary
information.
HTTP Port : Used to access the camera
using the Internet browser, defaulted to
80. Use the spin button to change the
HTTP Port value. The start value of the
port is 80, and increases or decreases
by 6 like 10000, 10006, 10012.
Device Port : Used to control the video signal transfer, defaulted to 60001(TCP).
TCP Port : Video signal transfer port using TCP protocols, defaulted to 60002(TCP).
UDP Port : Video signal transfer port using the UDP Unicast method, defaulted to
60003(UDP).
Upload Port : Used to upgrade the software fi rmware, defaulted to 60004(TCP).
Multicast Port :
Video signal transfer port using the UDP Multicast method, defaulted
to 60005(UDP).
Enter the password.
This is the login password for the "root" user who accesses the camera.
The default password is "4321".
Click [OK].
Manual network setup will be completed.
When the manual setup including <IP> is completed, the camera will restart.
4.
5.
6.
7.
SNC-B2331-ENG-QG.indd 9 2009-08-20 오전 11:42:38