Filter
Top Products
26_ camera setup
camera setup
DAY/NIGHT
You can specify a recording mode according to the scene.
Select <CAMERA SET> - <DAY/NIGHT>.
Select a screen transition mode according to the
illumination, and set options as appropriate.
DAY : Fixed to DAY mode, regardless of the
scene.
NIGHT : Fixed to NIGHT mode, regardless
of the scene.
If BURST is set to <ON>, the burst signal will
output.
AUTO : According to the luminance, this will
switch DAY to NIGHT mode, or vice versa.
DAY
NIGHT / NIGHT
DAY : If set to
<AUTO>, you can specify the brightness
level triggering the mode switch between
DAY and NIGHT as well as the interval.
MASK AREA : If there exists a bright spot
light source in a night scene, you can specify
the size and position as needed.
Any excessively bright area in a night scene
will be masked.
WHITE BAL
If you need to adjust the screen brightness, use the WHITE BALANCE function.
Select <CAMERA SET> - <WHITE BAL>.
Select a mode where you set the balance.
DAY : You can set the RED, and BLUE value
in DAY mode.
NIGHT : You can adjust the <WHITE BAL>
according to the ambient luminance.
1.
2.
y
y
y
y
y
1.
2.
y
y
AUTO
AUTO
BURST
OFF
DAY
DAY
NIGHT
NIGHT
BRIGHTNESS MID
BRIGHTNESS MID
DWELL TIME 2S
DWELL TIME 2S
NIGHT
NIGHT
DAY
DAY
BRIGHTNESS MID
BRIGHTNESS MID
DWELL TIME 5S
DWELL TIME 5S
MASK AREA 1 2
MASK AREA 1 2
WHITE BAL
WHITE BAL
DAY/NIGHT DAY
MODE ATW2
MODE ATW2
RED
RED
[
[
00
00
]
]
----
----
I
I
----
----
BLUE
BLUE
[
[
00
00
]
]
----
----
I
I
----
----
MASK AREA
MASK AREA
<SIZE>
<LOCATION>
<LOCATION>