Samsung SNV-5080 Security Camera User Manual


 
English _49
M
NETWORK CONNECTION AND SETUP
If the IP router has more than one camera connected
Configure the IP related settings and the Port related settings distinctly with each other.
Category Camera #1 Camera #2
IP related settings
IP Address
Subnet Mask
Gateway
192.168.1.200
255.255.255.0
192.168.1.1
192.168.1.201
255.255.255.0
192.168.1.1
Port related settings
HTTP Port
VNP Port
80
4520
10000
4530
If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address
bar of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port
http://192.168.1.201:10000
Auto Network Setup
Run <IP Installer.exe> to display the camera search list.
At the initial startup, both [Auto Set] and [Manual Set] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address labeled
on the rear of the camera.
Both the [Auto Set] and [Manual Set]
buttons will be activated.
Click [Auto Set].
The Auto Setting dialog appears.
The <IP Address>, <Subnet Mask>,
and <Gateway> will be set automatically.
Enter the password.
This is the login password for the
"admin" user who accesses the
camera. The default password is
"4321".
Click [OK].
Auto network setup will be completed.
The camera will automatically complete
the network setting and restart.
M
M
1.
2.
3.
4.
5.