Filter
Top Products
installation & connection
32_ installation & connection
INSTALLATION (SND-7082F)
Disassembling
1. Take the camera body with one
hand and take the top cover
with the other hand. Then, turn
the cover counter clockwise to
remove it.
Installation
1. Use the provided template to drill one hole for
the camera, and one for the screw (5 mm in
diameter, at least 35 mm in depth), and insert
the plastic anchor (HUR 5) to the end of the
screw hole.
2. Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.
3. Insert the camera body into the hole so that it
fits to the camera hole, and fix the body using
the ASSY tapping screws (TH M4xL30). (x3)
4. Refer to “Adjusting the monitoring direction for the camera” to adjust the lens in
a desir
ed direction. (page 38)
5. Close the top cover
.
Fit the top cover into the fixing tips of the camera body and turn the cover clockwise.
Camera Body
Top cover