Filter
Top Products
4. Fix the mounting bracket and housing using three screws.
5. Fix the housing to the wall mounted bracket using three
screws.
7
SPEED DOME CAMERA ACCESSORIES
6
SPEED DOME CAMERA ACCESSORIES
1. With STB-270PW, the wall mounted bracket, fix the bracket
to the intended location using four screws.
STH-160PI is the same as STH-160PO except for the fan and heater.
■ STH-160PO (Outdoor Housing), STH-160PI (Indoor Housing)
2. Connect cables to the video cable terminal and controller
cable terminal on the circuit board of the mounting bracket.
3. Connect the power cable for the fan heater (Outdoor
Housing).
Video Cable
InstallationGuide
·Pull the connection cable out of the bracket
through the hole in advance.
Cautions
·When using the outdoor or indoor housing,
remove the dome cover of the Speed Dome
Camera for clearer images.
Cautions
·For fixing the circuit board, match the lock screw
part with the direction of the housing sticker.
Cautions
Controller Cable
Mounting Bracket
Power Adapter Cable
Power Cable
7. Connect the circuit board to the connector of the Speed
Dome Camera as shown in the figure.
6. Fit and turn the Speed Dome Camera into the slot, locating it
in the direction marked on the mounting bracket, and fix it
using the rotation control screw.
8. Fix the external cover to the housing using four screws.