Samsung VP - D361W(i) Camcorder User Manual


 
ENGLISH
5858
Playback
Playing Back a Tape You have recorded on the LCD Screen
The Playback function and speaker works only in <Player> mode. page 19
You can monitor the playback picture on the LCD Screen.
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE].
(VP-D363(i)/D364W(i)/D365W(i) only)
3. Insert the tape you wish to view. page 32
4. Open the LCD Screen.
Adjust the angle of the LCD Screen and set the
brightness or colour if necessary.
5. Press the [
œœœœ
(REW)] button to rewind the tape to the
starting point.
To stop rewinding, press the [(STOP)] button.
The Camcorder stops automatically after rewinding is
complete.
6. Press the [
/❙❙ (PLAY/STILL)] button to start playback.
You can view the picture you recorded on the LCD
Screen.
To stop the play operation, press the [(STOP)]
button.
Adjusting the LCD Bright/LCD Colour during
Playback
You can adjust the LCD Bright/LCD Colour during
playback.
The adjustment method is the same procedure as used
in <Camera> mode. page 29
Adjusting the V
olume
When you use the LCD Screen for playback, you can
hear recorded sound from the built-in Speaker.
- Take the following steps to lower the volume or mute
the sound while playing a tape on the Camcorder.
When you hear sounds once the tape is in play, use the
[Zoom] lever to adjust the volume.
A volume level display will appear on the LCD Screen.
Levels may be adjusted from anywhere between
<00> to <19>.
If you close the LCD Screen while playing, you will
not hear sound from the speaker.
When the AV cable is connected to the Camcorder, you cannot hear sound
from the Built-In Speaker and cannot adjust the volume.
Volume control is disabled while PB Zoom is in use.
<Player> ( )
19
1. [PLAYER]
2. TAPE] ( VP-
D363(i)/D364W(i)/D365W(i))
3.
32
4.
5. [
œœœœ
(REW)]
, [
(STOP)]
6. [
/
■■
(PLAY/STILL)]
, [
(STOP)]
<Camera> ( )
29
,
-
, [Zoom]
.
<00> <19>
,
AV ,
PB Zoom
C
O
LO
R NITE
L
I
G
H
T
STOP
5 6
P
L
A
Y
Q
U
IC
K
M
E
N
U
60min
0:46:00:11
SP
[05]