Filter
Top Products
Advanced Shooting
PIP (Picture-In-Picture, VP-L850/L850D/L870 only)
ENGLISH
47
✤ The PIP(Picture-In-Picture) feature works in combination with the DIGITAL ZOOM function by using a small,
super imposed screen to show an image that is wider than the image being shot.
This should help you to get a clear idea of what you are recording.
- The PIP function only works in CAMERA mode.
1. Set the power switch to CAMERA mode.
2. Turn on the DIGITAL ZOOM. (see page 31)
3. Press the MENU ON/OFF button, the MENU List will be displayed.
4. Turn the UP/DOWN dial until PIP..........OFF is highlighted.
5. Press ENTER, the PIP ON and a small screen should appear.
6. Check which part you are shooting on the PIP screen,
and move the Zoom button to the “T” position to activate
the DIGITAL ZOOM mode.
■ Start recording by pressing the START/STOP button
when the portion you want to shoot appears.
7. Setting PIP......ON to OFF in the MENU will make the small screen
disappear and switch the PIP mode off.
Notes:
■ The PIP screen will be recorded if it is activated while recording.
■ The MENU ON/OFF function will not operate in EAS or REC mode.
■ PIP function will not operate in DSE mode.
CAMERA
➔
➔
ENTER
MENU
LCD ADJUST
DIS........................OFF
D.ZOOM................OFF
PIP........................OFF
DISPLAY ..............ON
WHITE BAL. ........AUTO
WL.REMOCON ....ON
EXIT:MENU
MENU
LCD ADJUST
DIS........................OFF
D.ZOOM................OFF
PIP........................ON
DISPLAY ..............ON
WHITE BAL. ........AUTO
WL.REMOCON....ON
EXIT:MENU
00607F VP-L800-UK(46-69) 2/17/03 11:20 AM Page 47