ENGLISH ESPAÑOL
6565
Grabación avanzadaAdvanced Recording
✤ The AUDIO DUBBING function only works in PLAYER Mode.
✤ You can add sound to the original sound on a pre-recorded tape,
recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing sound
1. Set the camcorder to PLAYER mode.
■
If you want to use an external microphone,
connect the microphone to the external MIC
input jack on the camcorder.
■
When you wish to dub using the External A/V
input, connect the AUDIO/VIDEO cable to
the camcorder by inserting the AUDIO/VIDEO
cable into the AV Jack at the front side of
the camcorder. (VP-D107i only)
- Press the MENU button, turn the MENU
DIAL to highlight A/V and press
the ENTER button.
- Turn the MENU DIAL to highlight AV
IN/OUT and press the ENTER
button to select AV IN.
2. Press the (PLAY/STILL) button and find
the time frame of the scene to be dubbed.
3. Press the (PLAY/STILL) button to
pause the scene.
4. Press the A.DUB button on the Remote
Control.
■
A.DUB will be displayed on the LCD.
■
The camcorder is in a ready-to-dub
state for dubbing.
5. Press the (PLAY/STILL) button to
start dubbing.
■
Press the (STOP) button to stop
the dubbing.
Notes
■
You can not use the audio dubbing function while playing a write
protected video tape.
■
When you wish to dub using the External A/V input, you must connect
the AUDIO/VIDEO cable to the audio system from which you wish to
record. (VP-D107i only)
■
You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
Audio dubbing
Dobragem de áudio
✤ La función de mezcla de audio (AUDIO DUBBING) sólo opera en la
modalidad PLAYER.
✤ Se puede añadir un sonido al sonido original de una cinta grabada en la
modalidad SP de 12 bits de sonido.
✤ Puede usar el micrófono incorporado o uno externo u otro equipo de audio.
✤ El sonido original no se borrará.
Grabación de sonido adicional
1. Ajuste la videocámara en la modalidad PLAYER.
■
Si va a usar un micrófono externo, conéctelo
en el conector MIC de la videocámara.
■
Si desea hacer la mezcla empleando la entrada
de A/V externo, conecte el cable AUDIO/VIDEO a
la videocámara insertándolo en la terminal AV que
está en el frontal de la videocámara (sólo los
modelos VP-D107i).
- Pulse el botón MENÚ, gire el DIALMENÚ
hasta resaltar A/V (audio/vídeo) y pulse el
botón ENTER.
- Gire el DIAL MENÚ para resaltar AV IN/OUT y
pulse el botón ENTER para seleccionar AV IN.
2. Pulse el botón (PLAY/STILL) y busque el
principio de la escena en la que desea hacer la
mezcla.
3. Pulse el botón (PLAY/STILL) para
hacer una pausa en la escena.
4. Pulse el botón A.DUB del mando a distancia.
■
En la pantalla LCD aparecerá el mensaje
A.DUB.
■
La videocámara estará lista para la mezcla.
5. Pulse el botón (PLAY/STILL) para empezar
la mezcla.
■
Pulse el botón (STOP) para detener la
mezcla.
Notas
■
La función de mezcla de audio no se puede emplear si la cinta está
protegida contra grabación.
■
Si desea hacer una mezcla usando la entrada de A/V externo, debe
conectar el cable AUDIO/VIDEO al sistema de audio desde el que quiera
grabar. (sólo en los modelos VP-D107i)
■
No es posible mezclar sonido en una cinta pregrabada en la
modalidad LP o de 16 bits.
DV
IEEE
1394
USB
A/V
S-VIDEO
MIC
AV IN
Audio (R)
(VP-D107i only)
Audio (L)
DV
IEEE
1394
USB
A/V
S-VIDEO
MIC
00762H VP-D107 UK+ESP(62~109) 4/20/04 10:19 AM Page 65