Filter
Top Products
ENGLISH
Advanced Shooting
Snap Shot (VP-L750/L750D/L770only)
✤ With the SNAP SHOT feature, your camcorder can function like a normal film camera, allowing you to take single
still pictures.
- The SNAP SHOT function only operates in CAMERA mode.
1. Set the power switch to CAMERA mode.
2. Press the SNAP SHOT button when you have the image
you wish to photograph in the shot.
■ Be careful not to shake your camcorder because
the image will be affected by any movement.
3. Once the SNAP SHOT button has been pressed, your camcorder
will automatically return to STANDBY mode after approximatly
6 seconds.
■ You can check the remaining available SNAP SHOT
space by looking at the time displayed on the screen.
■ To stop SNAP SHOT shooting, press the SNAP SHOT
button again.
Notes:
■ If the camcorder is knocked or shaken while taking a SNAP SHOT, the image may be blurred.
■ The SNAP SHOT is activated during shooting.
■ The still image will be displayed on the display if the SNAP SHOT button is pressed in CAMERA mode but no
tape has been inserted in your camcorder.
48
CAMERA
SNAP SHOT
SNAP SHOT
00441F VP-L700-UK(46-69) 3/13/03 9:15 AM Page 48