Filter
Top Products
ENGLISH
4444
You can set to display date and time on the LCD monitor.
1. Turn the Mode Dial to the Settings mode.
2. Press the [POWER] button to turn on the Miniket Photo.
3. Select <Date/Time> by moving the joystick left / right.
4. Select the display option by moving the joystick up / down, and then press
the joystick (OK).
◆ <Off>: Date and Time are not displayed.
◆ <Date>: The date is displayed.
◆ <Time>: The time is displayed.
◆ <Date & Time>: The date and time are displayed.
5. After you finish setting, turn the Mode Dial to the desired mode.
◆ The selected Date/Time is displayed in Movie Record or Photo Capture mode.
[ Note ]
✤
Date and time information is displayed on the LCD screen in Photo capturing and Movie
recording modes. In movie / photo playback modes, date and time information is not
displayed on the LCD screen.
Setting the Miniket Photo : Setting Date / Time
Setting Date / Time Display
3
4
SettingsSettings
Date/TimeDate/Time
Off
Date
Time
Date&Time
MoveMove SelectSelect
Settings
Date/Time
Move Select
50
12:00 2005.01.01
Settings
Date/Time
Move Select
SettingsSettings
Date/TimeDate/Time
Off
Date
Time
Date&Time
MoveMove SelectSelect
50
12:00 2005.01.01
5
Settings
Date/Time
Move Select
Settings
Date/Time
Move Select
IN
2592
5050
12:00 2005.01.01
12:00 2005.01.01
00934J VP-MS10 UK~053 6/17/06 6:22 PM Page 44