Filter
Top Products
Step 10: Door Install
Position the Door (s) so the holes in the Hinge Plate (m) line up with the front pair of holes in the Side Panel (u,v). Insert a Hinge Plate
Screw (k) through the Hinge Plate and thread it into each hole in the Side Panel. Tighten with a Phillips screw driver. Repeat process so
each Hinge Assembly is secured. See Diagram 10 for assistance.
Detailed View
Diagram 10
s
m
k
u
Step 10: Add Mid Shelves
Thread a Shelf Pin (e) into the desired location in the Panels (u,v,w). For each shelf, four Shelf Pins will be required. Insert each Mid
Shelf (r) into the assembly and press t onto the Shelf Pins. Make sure the wood strip on each shelf is facing toward the front. See Dia-
gram 10 for assistance. Note: Diagram 10 is a Back View.
Detailed View
Diagram 10
u
v w
e
r