Sanyo VCB-3574IR Security Camera User Manual


 
SPECIFICATIONS
Scanning system : EIA standard (525 TV lines, 30
frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/2 inch solid state image device CCD
Picture elements : 811 (H) x 508 (V)
Effective picture elements : 768 (H) x 494 (V)
Synchronizing system : Line lock/External sync (Automatic
switching)
Resolution : 570 TV lines horizontally, 350 TV
lines vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 50 dB
Minimum required
illumination
(incandescent lighting)
: Approx. 0.02 lux with a F 1.2 lens,
approx. 0.03 lux with a F 1.4 lens
Backlight compensation : Manual ON/OFF switching, zone light
measuring system
(Active when using an auto-iris lens)
Electronic iris function : Manual ON/OFF switching
Electronic iris range : 0.02 lux to 10,000 (F 1.2, lens)
0.03 lux to 15,000 (F 1.4, lens)
Flange-back : 12.5 mm ± 0.8 mm
Gamma correction : γ = 0.45
Lens mount : CS mount (or C mount with the
supplied adaptor)
Environmental conditions : Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
Power supply : 24 V AC, (–4 to +4 V) 60 Hz
Power consumption : 3.1 W (with auto iris lens)
2.4 W (without auto iris lens)
Weight : Approx. 330 g (without lens)
Dimensions
Features and specifications are subject to change without prior
notice or obligations.
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
VIDEO OUT
POWER
VS IN
SEE INSTRUCTION MANUAL
CLASS2WIRING
24V AC GND 24V AC
LINE
PHASE
12
22
11
1.5
108.5
99.5
1/4”–20 UNC
56
45
28
L72H4/US GB 1999, 2, 4
English 13