Sanyo VCC-4594 Camcorder User Manual


 
SPECIFICATIONS
Camera:
Scanning system : NTSC standard TV system (525 TV
lines, 30 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/3 inch solid state image device
CCD
Picture elements : 811 (H) x 508 (V)
Effective picture elements : 768 (H) x 494 (V)
Synchronizing system : Internal sync, Line lock manually
switchable
Resolution : 520 TV lines horizontally, 350 TV
lines vertically
Video output level : 1.0 Vp-p/75 ohms, composite
Video S/N ratio : More than 48 dB
Minimum required
illumination
(incandescent lighting)
: Approx. 0.03 lux with a F 1.2 lens
(B/W mode),
Approx. 0.6 lux with a F 1.2 lens (color
mode)
Control terminal : Manual color/black and white setting
Backlight compensation : Manual ON/OFF switching,
Multi-zone light measuring system
(Active when using an auto-iris lens)
Iris function : Manual ON/OFF switching
Electronic iris range : 0.6 lux to 35,000 lux (F 1.2, lens:
color mode)
1.0 lux to 50,000 lux (F 1.4, lens:
color mode)
Flange-back : 12.5 mm ± 0.5 mm
White balance : ATW/Manual switching
Lens mount : CS mount (or C mount with the
supplied adaptor)
Environmental conditions : Temperature: –10˚C ~ +50˚C
Humidity: less than 90% (no
condensation)
Power supply : 24 V AC, 60 Hz
Power consumption : 3.8 W (with auto iris lens)
2.9 W (without auto iris lens)
Weight : Approx. 450 g (without lens)
Dimensions: mm
Features and specifications are subject to change without prior
notice or obligations.
SERVICE
This camera is a precision instruments and if treated with care, will
provide years of satisfactory performance. However, in the event of a
problem, the owner is advised not to attempt to make repairs or open
the cabinet. Servicing should always be referred to your dealer or
Sanyo Authorized Service Centre.
136
126.5
1
15.4
25.2
11
1/4”–20 UNC
67
54
28
3
L53Z4/US GB 2001, 4, 2
English 17