Filter
Top Products
Flexible Motion Detection
The built-in motion sensing function can be used to detect
movement by a target object such as an intruder.
The following two settings can be used for this function.
Setting of both modes, PRESET and ZONE, cannot be performed at the same time.
Features
SANYO Security Systems for the Creation
of a Full-fledged LAN or Internet
All-around Privacy Masking
When there is a house, or even a win-
dow, within the camera frame, it is
possible to mask the area so that it
will not appear on the monitor screen,
thus protecting other people’s privacy.
Up to 24 rectangular masks of arbitra-
ry size (rectangular) can be set.
This optional board for network connection enables SANYO
VCC-9800P/9700P/9600P/9500P cameras to connect to a net-
work. The user can operate a network connected camera us-
ing a web browser (Internet Explorer). Included with the board
is the VA-SW3050LITE viewer software for viewing feeds
from multiple cameras.
Up to 256 Preset Positions
The user can set up to 256 preset positions with VCC-9800P/
9700P cameras and up to 128 preset positions with VCC-
9600P/9500P cameras. Preset positions can be set to any
angle—from directly below the camera to 5° higher than the
horizontal position—to allow capture of any image in the area
under surveillance by facing any direction in the adjustable
range of the lens. When manually operated, the lens can be
moved at the speed of 0.1 to 120°/sec for accurate tracking of
moving objects.
Max. 576x Zoom Combined with 36x Optical and
16x Digital Zooms (VCC-9800P/9700P)
The 36x optical zoom and 16x digital zoom can be combined
for a close-up at a magnification power of 576x. This allows
even distant subjects to be checked in detail, allowing one
camera to monitor a wider area.
Store display floor example
Display floor
Display floor
Reception
Camera
Entrance
Automatic viewing of up to 256 presets (36x
models) or 128 presets (30x models), with
selectable switching order and pause times for
up to 4 different sequences.
Up to 4 different settings for automatic panning
between two points at selectable speeds.
Up to 4 different settings capable of storing up to
1,000 commands of manual pan/tilt/zoom
operation in memory and recreating the same
movement pattern.
Enables automatic return to the mode set in
“auto return” when manual operation is not
performed within a specified amount of time.
Sequence:
Auto pan:
Tour:
Auto return:
PRESET:
ZONE:
3 Types of Auto Mode Settings
VAC-70 Monitor
Adjustment via VAC-70 Control Unit (Sold separately)
Connection of the VAC-70 control unit allows adjustment of
pan/tilt/zoom and setup directly from
an on-screen menu.
Video coaxial cable
Coaxial Control or RS-485
Communication protocol:
Coaxial control: SSP / H-SSP / PELCO-C
RS-485: SSP / H-SSP / PELCO-D
SSP (RS-485) Compatible
By using SSP (SANYO Security Serial Protocol), devices can
be controlled with just one controller via a daisy chain connec-
tion of up to 254 cameras and 100 DVRs. The maximum cable
length (total length of the daisy chain path) is 1200 m (approx.
4000 feet).
Time
Lx
B/W
mode
B/W
mode
Color mode IR cut filter ON
Proprietary auto-switching
infrared cut filter
Switchover point
B/W mode
(Approx.)
High mode
1~3 lx
3~9 lx
Low mode
Color mode
Model no.
VCC-9800P
(with F1.6 lens)
VCC-9700P
(with F1.6 lens)
VCC-9600P
(with F1.4 lens)
VCC-9500P
(with F1.4 lens)
High gain, color mode High gain, B/W mode
20 IRE
0.02 lx
—
0.016 lx
—
50 IRE
0.05 lx
—
0.04 lx
—
High-Sensitivity, Minimum Required Illumination
Detects motion at a preset position. Allows setting of motion
detection within the whole picture or setting of mask
patterns to exclude certain elements from detection.
The camera can be set to zoom in and out automatically
when motion is detected.
Surveillance of a detected object can be conducted at the following zoom magnifications.
IN: 1.4x, 2x, 2.8x, 4x, 5.6x, 8x, FULL (zooming in to the TELE end)
OUT: 1/1.4x, 1/2x, 1/2.8x, 1/4x, 1/5.6x, 1/8x, FULL (zooming out to the WIDE end)
Detects motion in detection areas (from one to four areas) set
within the whole space for which surveillance is possible dur-
ing a pan/title operation. Sensing is performed by splitting the
field of view into 48 areas. Movement and brightness levels
within the picture are analyzed to accurately detect surveillance
targets. When motion is detected, the camera can be set to
output alarm detection to ALARM OUT or LINE OUT, etc.
With ZONE setting, sensing occurs in areas set within the picture of the zone
targeted by the camera. No sensing occurs outside the camera’s target zone.
Setting Alarm Function
The unit can be connected to an external door switch or infra-
red sensor (external alarm input: 8 channels). When an alarm is
detected, the camera gives notice by automatically moving to
the preset position, zooming in on the image or displaying the
alarm on the screen. Furthermore, it has a built-in motion
sensor, which outputs alarm signals when a moving object,
such as an intruder, is detected. If you connect external
buzzers and/or lamps (external alarm output: 2 channels), alarm
signals will also be output to
them at alarm detection for you
to have audible and/or visual
notifications.
Panning range
360˚endless
Network Board VA-80LAN
(Sold separately)
Network Recording Software
VA-SW3050
(Sold separately)
VA-SW3050 network recording software is sold
separately for recording of surveillance video
and audio captured by cameras. With a PC used as a local
server, the VA-SW3050 software enables not only data
playback and recording but also improved system operation,
making it a powerful tool for network management.
Intelligent Switching from Color to
B/W (VCC-9800P/9600P)
Horizontal level
Tilting range
–5˚ to 185˚
(With digital auto flip ON)
Terminal side (Side-A)
20 IRE
0.4 lx
0.4 lx
0.32 lx
0.32 lx
50 IRE
1.0 lx
1.0 lx
0.8 lx
0.8 lx
Main
Monitor
SSP System Controller
Digital Video
Recorder
Dome
Camera
Main
Monitor
SSP System Controller
VA-SW3050LITE/VA-SW3050 Feature Comparison
Number of cameras supported
Number of users supported
Search camera
Live monitor
Camera control
Recording
Playback
Video search
Backup/Restore
Download/Print
VA-SW3050LITE
(Bundled)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
No
No
No
No
No
VA-SW3050
(Sold separately)
Max. 128
Max. 16
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
PTZ, etc.
Menu
Dead area when at 0° tilt
No dead areas with new speed dome cameras
VA-SW3050LITE/VA-SW3050 System Requirements
IBM PC/AT and compatibles
Windows
®
2000 Professional SP4, Windows
®
XP Home Edition
SP2, Windows
®
XP Professional SP2
When the number of cameras connected is 4 or fewer:
CPU: Pentium
®
4, 2.0 GHz or higher, Memory: 512 MB or more
When the number of cameras connected is between 5 and 16:
CPU: Pentium
®
4, 3.0 GHz or higher, Memory: 1 GB or more
MEMO (VA-SW3050):
When you record live video from 17 or more cameras simultane-
ously on a single PC, recording performance may be diminished
depending on your monitoring system configuration. In such
cases, add PCs used for recording so that the number of cameras
to record simultaneously per PC becomes 16 or fewer.
100Base-TX
1024 x 768 pixels or higher, 16 million colors or higher
AGP graphics card supporting hardware overlay
or PCI Express graphics card (Requires the latest DirectX 9.0c
compatible driver.)
Recommended graphics chips:
ATI: RADEON 9000 series or higher
nVidia: GeForce 4 series or higher
Quadro 4 series or higher
Matrox: MillenniumP series or higher
Sound card and speakers with 100% DirectX compatibility
DirectX 9.0c
PC
OS
CPU/
Memory
Network
interface
Display card
Audio
Component
Optical zoom
36x
Digital Video
Recorder
Dome
Camera
RS-485
Coaxial
Spot Monitor Spot Monitor
Upward Surveillance Enabled PTZ Operation
In addition to endless 360°/sec panning, the camera’s lens
section enables 185°/sec tilting in the vertical plane for an area
of surveillance expanded by 5° (indoor applications only) com-
pared to previous models.
Image from conventional
camera* at 0° tilt
*VCC-9400P/9300P cameras
Upward tilt to 5° past zero for
an expanded area of surveil-
lance with VCC-9800P/9700P/
9600P/9500P cameras