Filter
Top Products
Model No.
Image sensor
Effective image sensor
Horizontal resolution
Lens
Panning range Ceiling
Wall
Tilting range Ceiling
Wall
Synchronizing system
20 IRE
50 IRE
Video S/N ratio
Backlight compensation
Electronic shutter
White balance
Aperture compensation
Monitor output
Input/output
Environmental condition
Power requirement
Power consumption
Weight
Dimensions (Dia. x H)
VCC-9685VP
1/4” Interline transfer method CCD
752 (H) x 582 (V)
540 TV lines (typical)
Built-in varifocal lens, f=2.8 to 8.0 mm (F0.95 to
1.7), Adjustable iris level, L to H – VR
Approx. 200 deg. (+/-100 deg.)
Approx. 180 deg. (+/-90 deg.)
0 to 90 deg.
0 to 90 deg.
Internal synchronization / Line lock
Adjustable V-phase control
0.2 lx (F0.95, Gain High)
0.5 lx (F0.95, Gain High)
More than 50 dB (AGC OFF)
OFF/Center-zone metering/Multi-spot metering
(High/Normal)
1/50, 1/120, 1/1000, 1/2000 sec.
ATW / MWB / Adjustable R/B control at MWB
NORMAL / SHARP
2-pin for maintenance
Video signal output, power supply cable (2 wiries)
Temperature: -10 to +50°C (+14 to +122°F),
Humidity: 90% RH
12–15V DC / 24V AC ±10%, 50 Hz
2.4 W
500 g (1.1 lbs.)
ø150.6 x 103.5 mm (ø5.9 x 4.1 in.)
SpecificationsFeatures
• 540 TV Line Resolution
Featuring SANYO’s DSP circuitry and a high performance 1/4-inch
CCD for horizontal resolution of more than 540 TV lines and
superior color reproduction. Sharp, crisp images are delivered for
greater precision in surveillance under a varied range of condi-
tions.
• Built-in Varifocal Type Auto-iris Lens
(F0.95 to 1.7, f = 2.8 to 8.0 mm)
• High Sensitivity, Minimum Required Illumination
Minimum required illumination of 0.2 lx (20 IRE) or 0.5 lx (50 IRE)
with F0.95 lens at high gain.
• Mounts Easily on Both Walls and Ceilings
• Specifications subject to change without notice.
Dimensions
Optional Accessories
(Sold Separately)
In-Ceiling Mounting Bracket
VA-DK02
Smoked Type Dome Cover
VCZ-50
Half-Mirrored Type
Dome Cover
VCZ-51
Installation example
Bracket
Unit: mm (inch)
• Intelligent Backlight Compensation
The VCC-9685VP features two selectable backlight compensation
modes: multi-spot metering (applied to the whole screen) and
center-zone metering (applied to the central portion only).
• Built-in Electronic Shutter
A high-speed electronic shutter that is internally switchable for
eight modes using a DIP switch allows adjustment increments
from 1/50 to 1/2,000 sec.
Hardware switch
White balance switch
Aperture compensation setting
Backlight compensation mode setting
Synchronizing system setting
Electronic shutter LSB
MSB
ON
MWB
SHARP
MULTI
CENT
Line Lock
ON
ON
OFF
ATW
NORMAL
OFF
OFF
Internal
OFF
OFF
• Simplified Settings
LSB
MSB
ON
OFF
1/120 sec.
OFF
OFF
1/50 sec.
ON
ON
1/2000 sec.
OFF
ON
1/1000 sec.
• Electronic Shutter Setting
Manual Pan/Tilt
Panning range
Tilting range
Ceiling
200° (±100°)
0 to 90°
Wall
180° (±90°)
0 to 90°
Twisted Pair Board
VA-10T
Twisted pair terminal (CAT 5) for
video signal: NVT built-in UTP video
VCC-9685VP
Caution: Please consult the instruction manual to ensure safe and proper operation of the product.
DI Company of SANYO Electric Co., Ltd.
obtained Quality Management System
ISO 9001 and Environmental Management
System ISO 14001 certifications.
EC00J0303
051
Distributed by:
SANYO Electric Co., Ltd.
DI Company
http://www.sanyosecurity.com
©2007 SANYO Printed in Japan 2007.10 MA
SMS150
83.4 (3.3)
45.5 (1.8)
ø98.9 (3.9)
103.5 (4.1)
ø150.6 (5.9)
Minimum
illumination
Wall
mounting
Ceiling
mounting