Sanyo VPC-CG65 Camcorder User Manual


 
English 48
HINT
What is the camera focusing on?
iIf the focus range (page 78) is set to a
setting other than manual -, a
target mark & on the monitor shows
the area the camera is focusing on.
iThe camera automatically determines
the correct focus by measuring from 9
different focus points within the
shooting area. If the target mark is at a
position that is different from the point
you wish to focus on, you can refocus,
for example, by changing the shooting
angle.
iThe large target mark appears when
the camera focuses on a wide area in
the center of the screen.
About the focus indicator
iA green focus indicator appears when
the subject is successfully focused, or a
red focus indicator when the camera
was not able to focus the subject.
The shutter speed and aperture are
displayed
iWhen the camera focuses and the
target mark appears, at the same time,
the shutter speed and aperture settings
are also displayed. You can use them
as a reference when shooting.
If the camera shake icon > appears...
iDuring still image shooting, if the
shutter speed is slow and the
possibility that the image may be
blurred due to camera shake becomes
high, the camera shake icon may
appear on the monitor. In this case,
stabilize the camera when shooting, or
set the flash operation mode to
automatic (page 72).
iWhen shooting with the scene select
function set to the fireworks +
mode, the camera shake icon always
appears, but this is normal.
AF
F3.5
1/40
Shutter speed
Aperture
Target mark
Focus indicator
AF
F3.5
1/40
Camera shake icon