Sanyo VPC-CA100TA Digital Camera User Manual


 
155 English
Shooting
The digital
zoom does not
work.
The still image
is set to 4 or
5.
Set it to a
different mode. 46, 85
The digital
zoom setting is
set to “OFF”.
Set the digital
zoom setting to
“ON”.
50, 67
A warning tone
(beep-beep-
beep) sounds,
and it is not
possible to
take a picture
using the self-
timer.
The battery
pack is
consumed.
Recharge the
battery pack, or
replace with a
fully charged
battery pack.
Or connect the
AC adaptor.
24
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and push it
again.
67
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
48, 91
The \ icon
appears, and
shooting is not
possible.
The camera’s
internal
temperature is
high.
Discontinue
shooting, and
wait for the
camera to cool
down before
using it again.
29
Problem Cause Action
Reference
page