Filter
Top Products
31 English
SHOOTING SINGLE SHOTS
HINT
Adjusting the monitor brightness
iWhile the Recording Screen is active, you can quickly access the screen
for adjusting the brightness of the monitor by pressing the MENU button for
at least 1 second.
What is the camera focusing on?
iA target mark & on the monitor
shows the area the camera is
focusing on.
iThe camera automatically
determines the correct focus by
measuring from 9 different focus
points within the shooting area. If the
target mark is at a position that is
different from the point you wish to
focus on, you can refocus, for
example, by changing the shooting
angle.
iThe large target mark appears when
the camera focuses on a wide area
in the center of the screen.
The shutter speed and aperture are displayed (NORMAL mode)
iThe shutter speed and aperture settings are shown on the Recording
Screen. You can use them as a reference when shooting.
If the camera shake icon > appears... (NORMAL mode)
iDuring still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera shake becomes high, the
camera shake icon may appear on the monitor. In this case, use a tripod to
stabilize the camera when shooting, or set the flash operation mode to
automatic.
iWhen shooting with the scene select function set to the fireworks +
mode, the camera shake icon always appears, but this is normal.
Does it seem to take a long time to save images?
iWhen shooting in dimly lit conditions, it may take some time to save the
data to the card.
4
M
-
S
F3.5
1/2
Shutter speed
Aperture
Target mark
Camera shake icon