Filter
Top Products
23 English
INSTALLING THE CARD
<To remove the card...>
h To remove the card, press it in, and then release. The card will
protrude slightly, and you can then pull it out.
CAUTION
Close the card slot cover securely
iIf the card slot cover is not closed or is not closed completely, the camera
will no longer be waterproof. When closing the card slot cover, make sure
that no foreign object such as sand, hair, dust, etc. is caught in the rubber
seal.
Do not attempt to forcibly remove the card
iDoing so may damage the card or the stored files.
If the multi-indicator is flashing red...
iNever remove the card when the multi-indicator is flashing red, as doing so
may result in loss of files stored in the card.
HINT
Shooting without a card installed
iWhen a card is installed, images are recorded to and played back from the
card. When no card is installed, images are recorded to and played back
from the camera’s internal memory. When the camera is turned on with no
card installed, the internal memory icon is shown on the monitor to let
you know that the images you capture will be saved to the camera’s
internal memory.
1Push in 2Pull out