Sanyo VPC-X1200 Digital Camera User Manual


 
English 38
When you are finished viewing video clips...
iPress the ON/OFF button to turn the camera off.
CAUTION
How to save one frame from a video clip as a still image
1 Play back the video clip. Pause the playback at the point you wish to
“snap” a photo.
2 Press the shutter button.
iThe currently displayed frame is saved as a still image.
The data for a video clip is very large
iTherefore, be aware that if the video clip is uploaded to a computer to be
played back, the computer may not be able to play back the video fast
enough, making it appear jerky. (The video will always be displayed
properly on the camera monitor.)
If video clip recording stops even when there is card memory
remaining…
iDepending on the card you are using, recording may stop even if there is
remaining memory in the card.
iFor video clip recording, it is recommended that a high-speed memory
card be used.
If no audio is heard...
iThe audio is not played back when the video clip is played back in the
frame-by-frame, slow playback, fast playback or reverse playback mode.
During video clip playback, the sound of a motor is audible...
iDuring recording, the sound of the optical zoom movement or autofocus
movement was recorded. This is not a malfunction.
Does video clip playback stop when you adjust the volume?
iIf you adjust the volume during video clip playback, the playback may
temporarily pause. This is not a malfunction.