Filter
Top Products
On-Screen Display Manual
2
SECO-LARM
U.S.A., Inc.
Precautions:
PLEASE READ THIS MANUAL THOROUGHLY BEFORE USING THE CAMERA TO BECOME FAMILIAR WITH THE
CORRECT OPERATIONAL PROCEDURES.
Do not open the camera body or touch
any electrical parts.
Electric shock may occur.
Do not insert objects into the
camera body.
Doing so may cause fire or
electric shock.
Do not touch the camera with
wet hands.
Electric shock may occur.
Precautions While Camera is in Use:
Do not disconnect the power cord from
the camera before disconnecting from the
wall outlet.
Always disconnect the power by removing
the plug from the wall outlet.
If the camera emits a burning smell,
immediately disconnect it from the power
source and report the problem to your
distributor.
Precautions When Installing:
Do not install the camera where it might be
exposed to extreme temperature conditions.
Only use the camera in conditions where
temperatures are between 14°~122° F
(-10°~50° C). Make sure the area is well
ventilated when operating in high temperatures.
Do not install near any cooling or heating
equipment.
Do not install or use the camera in an area
where humidity is high.
Do not install the camera in dusty
environments.
Do not install the camera under unstable
lighting conditions.
Severe lighting change or flickering can cause
the camera to work improperly. If the camera is
exposed to a spotlight or an object reflecting
strong light, smear or blooming may occur.
Do not touch the front lens.
This is one of the most important parts of the
camera. Be careful not to leave fingerprints on
the lens cover.
Do not drop the camera or subject it to
physical shocks.
Malfunctions may occur.
Never keep the camera pointed directly at
strong light.
Continuous exposure to intense light may
damage the CCD.
Do not expose the camera to rain or other
liquids.
If the camera gets wet, wipe it dry
immediately. Liquids may contain chemicals
that corrode the electronic components.
Do not expose the camera to radioactivity.
If exposed to radioactivity, the CCD will fail.
Only apply power after the installation of
the product.
Please check that the power satisfies the
normal specifications before connecting
the camera.