Filter
Top Products
14
Rapid charger
100 – 240 V, 50/60 Hz, with automatic rapid-charging
stop. Indicators for rapid and normal charging. Rapid
charging up to about one hour. 12V terminal for car
battery and 3.5mm jack 12V/500 mA. Power-supply
cable.
Cat. No. 711.34.022
10V Nicad battery
Dedicated rapid-changing battery with overload protec-
tion and spare-fuse compartment; e.g. for extended
shoots.
Cat. No. 711.34.010
External battery adapter
Separates the power-supply holder from the camera
and ensures reliable power supply even at very low tem-
peratures because it can be carried close to your body.
Consists of connecting cable with terminals for the bat-
tery holder and the corresponding slot in the camera.
Cat. No. 711.34.011
PowerInterface
Same size as the Nicad battery. Permits connection of
different power sources, thus facilitating the stationary
and mobile use of the camera. Requires 12 V Power-
supply adapter 711.34.013.
Cat. No. 711.34.012
Battery box
Rollei battery box with cable for 5x type DL 123 A 3V-
lithium batteries as power source of Rollei PowerInter-
face. Should always be in your bag – just in case.
Capacity about 30 – 40 films (6x6/120) in normal
ambient temperature (~ + 20 to + 21°C).
Cat. No. 711.34.020
12V Power-supply adapter
Power-supply unit for System 6000 cameras in conjunc-
tion with Rollei PowerInterface. Ideal for stationary use
of dedicated cameras.
Cat. No. 711.34.013
Professional Power Supply
The dedicated power supply is tailored to the needs of
its users. The camera‘s electronics and motors are sup-
plied with power by a rechargeable sintered high-per-
formance Nicad battery. The benefits of this profes-
sional solution are high shooting capacity, easy handling
and safe operation even at low temperatures.
At standard room temperature, the energy of the dedi-
cated battery is good for about 200 shots. When only
about 20 exposures remain, a warning will light up in
the camera viewfinder. Below a minimum charge, all
camera functions will be disabled. Interchangeable bat-
teries will see you through even extensive shoots.
Sufficient power is assured even at very low tempera-
tures. Just carry the battery on your body or in your bag
and connect it to the camera via an external battery
adapter. Rolleiflex 6000 cameras come with a rapid
charger with automatic charge limiter. It takes about
one hour to recharge the battery outside the camera.
The charger will then switch back from rapid to normal
charging. In a hurry, you may stop charging after only
15 minutes. The battery will then provide sufficient
energy for about 50 shots.
If there is no wall outlet around, the charger may be
connected to a 12V car battery via an optional cable.
The Rollei PowerInterface offers even more power-
supply options. It is the same size as the Nicad battery
and can be inserted in the battery compartment instead
of the latter. A choice of different power sources can
then be connected to it, which opens up new possibili-
ties for the stationary or mobile use of the camera.
These are, for example, the standard charger, the 12V
Rollei power-supply adapter, the Rollei battery box for
lithium batteries, the Einhell Mobile Energy Station or
the car‘s cigarette-lighter socket.
The PowerInterface requires 12 – 18 VDC of at least
200 mA.