Filter
Top Products
66
Starting the PC mode
The camera driver must be installed before using PC mode.
To save battery power, it is recommended that you use an AC adaptor(Optional) when
connecting the camera to a computer.
INFORMATION
If you insert the USB cable into a USB connection terminal, the camera working mode will
change to the PC mode automatically.
In this mode, you can download stored images to your PC through the USB cable.
There is no menu available when the PC mode is selected.
The camera status LED lamp blinks when the files are transferring via the USB connection.
Connecting the camera to a PC
1. Turn the PC power on.
2. Turn the camera power on.
3. Connect the PC and the camera with the
USB cable.
- Insert the small plug of the USB cable to the
camera USB connection terminal.
- Insert the large plug of the USB cable to the
USB port of PC
- The plugs must be firmly inserted.
Disconnecting the camera and PC
Refer to the following page.
- WIN 98SE : p. 83
- WIN 2000/ ME/ XP : p. 85