Filter
Top Products
Applications
67
Camera Setting:
Set the camera to wireless flash.
For details, refer to the operating instructions supplied with your camera.
Controller Setting:
1 Press the MODE button repeatedly to display
[WL].
2 Press the Fn button.
3 Press the g or G button to make [CTRL] blink.
4 Press the Fn button.
5 Press the g or G button to make RATIO [ON] blink.
6 Press the Fn button.
7 Press the f or F button to select the lighting ratio.
• The lighting ratio may be set to the following.
1, 2, 4, 8, 16, --*
* The flash unit cannot flash when the lighting ratio is set to [--].
8 Press the g or G button to select the lighting ratio
of the controller and off-camera flash units (RMT,
RMT2).
• Set the power level ratio to [--] on the flash unit when there is an off-
camera flash (RMT/RMT2) you don't want to fire when you use the
flash unit with the controller after setting the flash unit to [CTRL1].
9 Press the Fn button.
10 Press the TTL/M button to display .
• When is selected, manual setting flash is used with the
lighting ratio control.