Sony 4-187-045-11(1) Digital Camera User Manual


 
172
Printing images
Specifying DPOF
Using the camera, you can specify the still images and the number of
images to print before you print images at a shop or with your printer.
Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You can specify any number up to 9.
Specifying /unspecifying DPOF on selected images
1 MENU button t 1 t [Specify Printing] t [DPOF Setup]
t [Multiple Img.]
2 Select the image with b/B on the control button.
3 Select the number of sheets with the center of the control
button.
To unspecify DPOF, set the number to “0.”
4 Press the MENU button.
5 Select [Enter] with v, then press the center of the control
button.