Filter
Top Products
Sony A700
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes or set the correct manual exposure in “M” mode.
3. Press the WB (White Balance) Button to display the White Balance mode
screen.
4. Select a custom white balance item ( ) using the / on the multi-selector.
5. Select ( SET), then press the center of the multi-selector to display the
register screen.
6. The message “Use spot metering area. Press shutter to calibrate.” will
appear on the screen.
7. Aim the camera in the appropriate direction for the given lighting condition
and press the shutter release button. See the ExpoDisc Instruction Manual for
more information on where to aim the camera.
8. The register selection screen appears. Select a memory number with /
( 1), then press the center of the multi-selector. The Sony A700 allows you
to save up to 3 custom white balance references. This white balance setting
will stay in effect until a new custom white balance is registered under the
same memory number.
9. Make sure that the number you registered (ie 1), is the same white
balance that you are set to on the White Balance mode screen.
10.If you get the message “Custom WB error” this indicates that you need to
adjust your exposure and reattempt to set your white balance.
11.Remove the ExpoDisc, return the camera to auto focus if desired and start
shooting.
Sony A900
1. Install the ExpoDisc and set the camera to Manual Focus mode.
2. Allow the camera to set an automatic exposure using the “P”, “S” or “A”
modes or set the correct manual exposure in “M” mode.
3. Press the WB (White Balance) Button to display the White Balance mode
screen.
4. Select a custom white balance item ( *) using the / on the multi-
selector, then press the center of the multi-selector.
5. Select ( SET) with the / on the multi-selector, then press the center of
the multi-selector.
6. Aim the camera in the appropriate direction for the given lighting condition
and press the shutter release button. See the ExpoDisc Instruction Manual for
more information on where to aim the camera.
7. The shutter clicks and the calibrated values (ColorTemperature and Color
filter) are displayed.
Copyright, 2010 ExpoImaging, Inc.
“Sony” and the Sony camera models listed are trademarks of Sony, Inc.