Filter
Top Products
62
Removing dust from inside the viewfinder (CCD-TR618 only)
(1) 1 Remove the screw with a screwdriver (not supplied). 2 Then, while
holding the RELEASE knob up, 3 turn the eyecup in a counterclockwise
direction and pull it out.
(2) Clean the surface with a commercially available blower for a still camera.
(3) Turn the eyecup in a clockwise direction, then replace the screw.
Caution
Do not remove any other screws. You may remove only the screw to remove the
eyecup.
Charging the built-in rechargeable lithium cell
Your camcorder is supplied with a built-in rechargeable lithium cell so as to retain the
date and time, etc., regardless of the setting of the POWER switch. The rechargeable
lithium cell is always charged as long as you are using your camcorder. The cell,
however, will get discharged gradually if you do not use your camcorder. It will be
completely discharged in about 4 months if you do not use your camcorder at all. Even
if the rechargeable lithium cell is not charged, it will not affect the camcorder operation.
To retain the date and time, etc., charge the cell if the cell is discharged.
Charging the rechargeable lithium cell:
• Connect your camcorder to house current using the AC power adaptor supplied with
your camcorder, and leave your camcorder with the POWER switch turned off for
more than 24 hours.
• Or install the fully charged battery pack in your camcorder, and leave your camcorder
with the POWER switch turned off for more than 24 hours.
Precautions
Camcorder operation
• Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).
• For DC or AC operation, use the accessories recommended in this operating
instructions.
• If any solid object or liquid get inside the casing, unplug your camcorder and have it
checked by a Sony dealer before operating it any further.
• Avoid rough handling or mechanical shock. Be particularly careful of the lens.
•Keep the POWER switch set to OFF (CHARGE) when you are not using your
camcorder.
• Do not wrap your camcorder with a towel, for example, and operate it. Doing so
might cause heat to build up inside.
• Keep your camcorder away from strong magnetic fields or mechanical vibration.
Maintenance information and precautions