Filter
Top Products
66
Others
Symptom Cause and/or Corrective Actions
• COMMANDER is set to OFF.
m Set it to ON. (p. 28)
• Something is blocking the infrared rays.
m Remove the obstacle.
• The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 82)
• The batteries are dead.
m Insert new ones. (p. 82)
• Detach the eyecup and clean the viewfinder lens. (p. 59)
• The POWER of the receiver is turned off.
m Set the POWER switch on the receiver to ON. (p. 21)
• The camcorder and the receiver are not facing each other.
m Adjust the position and angle of both units. (p. 80)
• The receiver is positioned too far from the camcorder.
m Use the camcorder near the infrared receiver.
• Direct sunlight is shining on the infrared sensor of the receiver.
m Avoid direct sunlight.
The supplied Remote
Commander does not work .
There is dust in the viewfinder.
(CCD-TR501E/TR502E only)
Trouble check
The infrared transmission system
does not operate. (CCD-TR740E
only)