Filter
Top Products
25
CCD-TRV12/TRV22/TRV33/TRV112/TRV212 3-859-057-15.E
Advanced operations
Selecting the START/STOP mode
Your camcorder has two modes besides normal start/stop mode. These modes enable
you to take a series of quick shots resulting in a lively video, or to avoid recording
unnecessary scenes resulting from failing to turn off the camcorder.
(1) While pressing PUSH OPEN, open the LCD panel.
(2) Set START/STOP MODE to the desired mode.
: Recording starts when you press START/STOP, and stops when you press it
again (normal mode).
ANTI GROUND SHOOTING : The camcorder records only while you press
down START/STOP so that you can avoid recording unnecessary scenes.
5 SEC : When you press START/STOP, the camcorder records for 5 seconds and
then stops automatically.
(3) Turn STANDBY up and press START/STOP. Recording starts.
If you selected 5 SEC, five dots appear in the viewfinder. The dots disappear at a rate of
one per second. When five seconds elapse and all the dots disappear, the camcorder
switches to Standby mode automatically.
If you selected , the camcorder records as long as you hold down START/STOP.
To extend the recording time in 5 SEC mode
Press START/STOP again before all the dots disappear. Recording continues for about
5 seconds from the moment you press START/STOP.
Note on 5 SEC recording
If you have turned off the indicators on the LCD screen, the dots do not appear.
START/STOP MODE
SEC
5
ANTI GROUND
SHOOTING