Filter
Top Products
"Handycam" User Guide
PrintSearch
Operation Search
Before use
Getting started
Recording
Playback
Playing images on a TV
Saving images with an external
device
Customizing your camcorder
Troubleshooting
Maintenance and precautions
Contents list
Top page > Playing images on a TV > Playing images on a non-high-definition TV > Connecting the
camcorder to a non-high-definition TV
Connecting the camcorder to a non-high-definition TV
When movies are recorded with high definition image quality (HD), they are played back in standard
definition image quality (STD) on a non-high-definition TV. When movies are recorded with standard
image quality (STD), they are played back in standard definition image quality (STD).
:Signal flow
1. Switch the input on the TV to the connected jack.
2. Connect your camcorder and the TV using an AV Cable (
; sold separately).
3. Play a movie or a photo on the camcorder.
Notes
Refer to the instruction manuals of the TV as well.
You should use the AC Adaptor as the power source (models with an AC Adaptor). [Details]
When you play back standard definition image quality (STD) movies on a 4:3 TV that is not
compatible with the 16:9 signal, set [
Wide Mode] to [4:3] to record movies with 4:3 aspect ratio.
If you connect your camcorder to the TV using more than one type of cable to output images, HDMI
input takes priority on the TV.
Related topics
Information on supplied items: Differences in supplied items
[TV Type]
Back to top
Copyright 2013 Sony Corporation
66