Filter
Top Products
106
Table of Contents Enjoy Useful Functions Index
US
(Warning indicator pertaining to
memory card)
Slow flashing
Free spaces for recording images are running
out. For the type of memory card you can use
with your camcorder, see page 22.
N
o memo
ry card is inserted (p. 22).
Fast flashing
There are not enough free spaces for recording
images. After storing the images on other
m
edia (p
. 61), delete unnecessary images, or
form
at the memory card (p. 89).
The image data base file may be damaged.
Check the data base file by touching
(MENU) [Setup] [
(Media Settings)]
[Repair Img. DB F.] the recording
medium.
The memory card is damaged.
(Warning indicators pertaining to
memory card formatting)
The memory card is damaged.
The memory card is not formatted correctly
(p. 89).
(Warning indicator pertaining to
incompatible memory card)
Incompatible memory card is inserted (p. 22).
(Warning indicator pertaining to
the write-protect of the memory card)
The memory card is write-protected.
Access to the memory card was restricted on
another device.
(Warning indicator pertaining to the
flash)
Fast flashing
There is something wrong with the flash.
(Warning indicator pertaining to
camera-shake warning)
The amount of lights is not sufficient, so
camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake
easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
(Warning indicator pertaining to
photo recording)
The recording media is full.
Photos cannot be recorded during processing.
Wait for a while, then record.
When [
REC Mode] is set to [Highest
Quality
] or [60p Quality ], you cannot
capture photos while recording movies.
Furthermore, if [
Frame Rate] is set to
[24p], you cannot record photos while the
camcorder is in movie recording standby
mode.
Tips
You may hear a melody when some warning
indicators appear on the screen.
Description of warning messages
If messages appear on the screen, follow the
instructions.
Recording media
Cannot recognize the internal memory.
Format and use again.
The internal recording medium of the
camcorder is set differently from the default
form
at. Performing [Format] (p. 89) may
enable you to use your camcorder. This
will delete all data in the internal recording
medium.