Sony D700 Digital Photo Frame User Manual


 
27
GB
Try using various functions
Displaying an image stored in a
USB memory device
1 Connect the AC power adaptor to the photo frame and
connect the AC power adaptor to an AC outlet.
2 Turn on the photo frame.
3 Connect the USB memory device to the EXT
INTERFACE (USB A) connector on the photo frame.
4 Select the [USB] External Device in Select device
(page 23).
For details on the slideshow, see page 16. For details on adding
images to the internal memory, see page 21.
USB memory
P Notes
The playback device will be
switched to the USB external
device if you connect the USB
memory to the USB A connector
during playback of the image in
the internal memory.
Do not disconnect the USB
memory, or turn off the photo
frame while the access lamp on the
photo frame is flashing. Doing so
may damage the data stored in the
USB memory.
Sony assumes no
responsibility for any damage or
loss of data.
The photo frame cannot use USB
memory data that has been
encrypted or compressed using, for
instance, fingerprint authentication
or a password.
Do not connect a computer to the
USB mini B connector on the
photo frame simultaneously when
a USB memory is connected to the
EXT INTERFACE (USB A)
connector.
The photo frame may not be able
to access files normally from a
USB hub or USB device with a
built-in USB hub may not operate
properly.