Sony D810 DPF-D720 Digital Photo Frame User Manual


 
E:\_NOUHIN_Nagashima\-ALAYA\D710_GB\4259440121DPFD710_GB\060C04.fm
Master: Left
DPF-D1020/D1010/D820/D810/D720/D710/D700 4-259-440-12 (1)
28
GB
Connecting to a computer
1 Connect the AC adaptor to the photo frame, and to the
AC power source.
2 Connect the computer and photo frame with a
commercially available USB cable.
3 Turn the photo frame on.
4 Operate the computer to exchange images with the
internal memory of the photo frame.
System Requirements
x Windows
Recommended OS: Microsoft Windows 7/Windows Vista SP2 /
Windows XP SP3
Port: USB port
x Macintosh
Recommended OS: Mac OS X (v10.4 or later)
Port: USB port
To USB mini B
connector
To USB connector
Computer
P Notes
Use a mini B-Type USB cable.*
* When you use a commercially
available USB cable, use a
USB cable with a mini B-type
plug (for the USB mini B
connector of this unit, frame-
side connector type) shorter
than 3 meters.
If multiple USB devices are
connected to a computer or if a
hub is used, a problem may occur.
In such a case, simplify the
connection.
You cannot operate the photo
frame from another USB device
being used simultaneously.
Do not disconnect the USB cable
during data communication.
Operation with all computers that
satisfy the recommended system
requirements is not guaranteed.
The photo frame has been
demonstrated as operable when
connected to a computer. When
other devices are connected to the
photo frame, these devices may
not recognize the internal memory
of photo frame.
Do not connect a computer to the
USB mini B connector on the
photo frame simultaneously when
a USB memory is connected to the
EXT INTERFACE (USB A)
connector.
010COV.book Page 28 Monday, August 2, 2010 3:01 PM