Sony DCR-DVD610 Camcorder User Manual


 
27
Getting Started
to save battery power. The recorded image
will not be affected by the setting. To turn
on the LCD backlight, press and hold DISP/
BATT INFO for a few seconds until
disappears.
b Notes
Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
z Tips
If you open the LCD panel 90 degrees to the
camcorder, then rotate it 180 degrees to the lens
side, you can close the LCD panel with the LCD
screen facing out. This is convenient during
playback operations.
Touch (HOME) t (SETTINGS) t
[SOUND/DISP SET] t [LCD BRIGHT]
(p. 86), and adjust the brightness of the LCD
screen.
The information is displayed or hidden (display
y no display) each time you press DISP
BATT/INFO.
You can view images using the viewfinder
to avoid wearing down the battery, or when
the image seen on the LCD screen is poor.
Pull out and look into the viewfinder.
Adjust the viewfinder to your eyesight.
z Tips
You can adjust the brightness of the viewfinder
backlight by touching (HOME)
t (SETTINGS) t [SOUND/DISP SET]
t [VF B.LIGHT] (p. 86).
Adjust and fasten the grip belt as illustrated,
and hold your camcorder properly.
Adjusting the viewfinder
Viewfinder lens
adjustment lever
Move it until the
image becomes clear.
Viewfinder
Fastening the grip belt