Filter
Top Products
180
The Remote Commander supplied
with your camcorder does not work.
Troubleshooting
You cannot charge the battery pack.
Others
Symptom Cause and/or Corrective Actions
• The tape has no cassette memory.
c Use a tape with cassette memory. (p. 108, 171)
• The cassette memory is full.
c Erase another title. (p. 111)
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not visible.
(p. 20)
• Nothing is recorded in that position on the tape.
c Superimpose the title to the recorded position. (p. 108)
• The tape has no cassette memory.
c Use a tape with cassette memory. (p. 114, 171)
• The cassette memory is full.
c Erase some titles. (p. 115)
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not visible.
(p. 20)
• Remove the i.LINK cable (DV connecting cable), and connect it
again.
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the VCR
again. (p. 84)
• The camcorder is connected to DV equipment of other than Sony.
c Set it to IR. (p. 85)
• Setting programme on a blank portion of the tape is attempted.
c Set the PROGRAM again on a recorded portion. (p. 93)
• The camcorder and the VCR are not synchronized.
c Adjust the synchronicity. (p. 90)
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 116)
• Something is blocking the infrared rays.
c Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 213)
• The batteries are dead.
c Insert new ones. (p. 213)
• Display is set to V-OUT/LCD in the menu settings.
c Set it to LCD. (p. 116)
• The POWER switch is not set to OFF (CHG).
c Set it to OFF (CHG).
The cassette label is not recorded.
While editing using the i.LINK cable
(DV connecting cable), recording
picture cannot be monitored.
Digital program editing does not
function.
The title is not recorded.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.