Filter
Top Products
45
Recording/Playback
To check the remaining battery ....qf
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO qf. If you press this
button once, BATTERY INFO appears on the
screen for about 7 seconds. Press the button
while BATTERY INFO appears on the screen
to extend the indication to the 20-second
maximum.
To turn off the operation confirmation
beep.................................... 7
See [BEEP] on page 78.
To initialize the settings (RESET).. qg
Press RESET qg to initialize all the
settings, including settings for date and
time. (Setup items customized on Personal
Menu are not initialized.)
Other part names and functions
4Built-in 4ch microphone
When an external microphone (optional) is
connected, it takes precedence over the internal
microphone (p.96).
q;Remote sensor
Point the Remote Commander (p.49) towards
the remote sensor to operate your camcorder.
qaRecording lamp
The recording lamp lights up in red during
recording (p.78).
The lamp flashes when the remaining capacity
for the battery or disc is running low.
qsSpeaker
Sounds come out from the speaker while
playing back.
• For how to adjust the volume, see page 41.
Recording/playback
Recording
capacity (approx.)
Remaining battery
(approx.)