Filter
Top Products
12
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 80) after
attaching it to your camcorder.
b Notes
• You cannot attach any “InfoLITHIUM” battery
pack other than the H series to your camcorder.
1 Align the terminals of the battery
pack and your camcorder (1),
then attach the battery pack and
click it into place (2).
2 Slide the POWER switch to OFF
(CHG) (The default setting).
3 With the v mark on the DC plug
facing up, connect the AC
Adaptor to the DC IN jack on the
Handycam Station.
4 Connect the power cord to the AC
Adaptor and the wall outlet.
5 Insert the camcorder into the
Handycam Station securely, all
the way to the bottom.
The CHG (charge) lamp lights up and
charging starts. The CHG (charge) lamp
turns off when the battery is fully
charged. Remove your camcoder from
the Handycam Station.
5
1
2
1
2
3
4
POWER
switch
DC IN jack
DC plug
AC Adaptor
To the wall outlet
Battery pack
Power cord
CHG (charge) lamp