Filter
Top Products
Troubleshooting
Troubleshooting
119
Dubbing/Editing
Image protection cannot be applied. cWhen you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 129)
cPerform the operation again on the index screen. (p. 108)
Cannot mark pictures for print. cWhen you are using the “Memory Stick Duo” with the write-protect tab,
release the lock on the write-protect tab of the “Memory Stick Duo.”
(p. 129)
cPerform the operation again on the index screen. (p. 109)
• The maximum number of pictures you can mark for print is 999.
• Movies cannot be marked for print.
The data file name is not indicated
correctly.
• Only the file name is displayed if the directory structure does not
conform to the universal standard.
• The file is damaged.
• The file format is not supported on your camcorder. (p. 128)
The data file icon flashes. • The file is damaged.
• The file format is not supported on your camcorder. (p. 128)
Symptom Cause and/or Corrective Actions
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
cSet [DISPLAY] to [LCD PANEL] in the (STANDARD SET)
menu. (p. 88)
Cannot dub correctly using the A/V
connecting cable.
cSet [DISPLAY] to [LCD PANEL] in the (STANDARD SET)
menu. (p. 88)
• The A/V connecting cable is not connected properly.
cMake sure that the A/V connecting cable is connected to the proper
jack, i.e. to the output jack of a device you are dubbing a picture from,
or to the input jack of another device for dubbing a picture from your
camcorder.
Pictures from connected devices are
not displayed correctly.
• The input signal is not NTSC. (p. 95)
New sound added to a recorded tape
is not heard.
cIn the (STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST1] (original sound) side until the sound is heard appropriately. (p. 85)
A title is not recorded/A cassette label
is not recorded.
cUse a cassette with Cassette Memory. (p. 127)
cErase unnecessary titles when the Cassette Memory is full. (p. 82)
cSet the write-protect tab to REC. (p. 127)
• A title cannot be added to a blank section of the tape.
The title is not displayed. cSet [ TITLE DISP] to [ON] in the (EDIT/PLAY) menu.
(p. 82)
• The title cannot be displayed during Easy Handycam operation.
The title cannot be deleted. cSet the write-protect tab to REC. (p. 127)
Symptom Cause and/or Corrective Actions
,continued