Filter
Top Products
Using the Menu
66
b Notes
• You cannot use the white balance together with the NightShot plus or Super NightShot plus
function.
• The setting returns to [AUTO] when you disconnect the power source from your camcorder
for more than 5 minutes.
z
Tips
• For better color balance adjustment when [WHITE BAL.] is set to [AUTO], aim your
camcorder at a nearby white object for about 10 seconds after setting the POWER switch
to CAMERA-TAPE when:
– You remove the battery pack for replacement.
– You bring your camcorder outdoors from inside the house while using fixed exposure, or
bring your camcorder in from outside.
• Redo the [ONE PUSH] procedure when:
– You changed the [PROGRAM AE] settings when [WHITE BAL.] is set to [ONE PUSH].
– You brought your camcorder outdoors from inside the house, or vice versa.
• Set [WHITE BAL.] to [AUTO] or [ONE PUSH] under white or cool white fluorescent
lamps.
AUTO SHUTTER
SPOT FOCUS
See page 40 for details.
FOCUS
See page 41 for details.
FLASH SET
Note that these settings will not function with external flashes that do not support
the following settings.
GON Select to automatically activate the electronic shutter to adjust the
shutter speed when recording in bright conditions.
OFF Select when recording without using the electronic shutter.