Sony DPF-E75 Digital Photo Frame User Manual


 
32
GB
It is not possible to enlarge an image using the
buttons on the photo frame.
You can rotate an image during single view
mode.
Operate from the menu of the
photo frame
1 Press MENU in single view mode.
2 Press B/b to select the (Editing)
tab.
3 Press v/V to select [Rotate] and
then press .
4 Press v/V to select the direction to
rotate and then press .
•:
Rotates the image 90 degrees
clockwise.
•:
Rotates the image 90 degrees
counterclockwise.
5 Press v/V to select [OK] and then
press .
Tips
You can also rotate an image with (ROTATE)
on the remote control. The image rotates 90 degrees
counterclockwise every time you press the button.
For an internal memory image, image rotation data
will be retained even after the power is turned off.
You can rotate the image of the index image
display.
Changing the settings of
the auto power on/off
function
You can use the timer function to turn the
photo frame on or off automatically when the
photo frame is turned on.
1 Press MENU.
2 Press B/b to select the
(Settings) tab.
3 Press v/V to select [Auto Power ON/
OFF], and press .
The screen used for setting a value for
[Auto Power ON/OFF] is displayed.
4 Press v/V to select [Setup method]
and press . Then, press v/V to
select [Simple] or [Advanced], and
press .
[Simple]:
Sets the auto power on/off function finely
in one minute increments.
[Advanced]:
Sets the auto power on/off function
according to a day of the week by one
hour units.
Rotating an image